12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271 |
- #!/usr/bin/env bash
-
- # dehydrated by lukas2511
- # Source: https://github.com/lukas2511/dehydrated
- #
- # This script is licensed under The MIT License (see LICENSE for more information).
-
- set -e
- set -u
- set -o pipefail
- [[ -n "${ZSH_VERSION:-}" ]] && set -o SH_WORD_SPLIT && set +o FUNCTION_ARGZERO
- umask 077 # paranoid umask, we're creating private keys
-
- # Find directory in which this script is stored by traversing all symbolic links
- SOURCE="${0}"
- while [ -h "$SOURCE" ]; do # resolve $SOURCE until the file is no longer a symlink
- DIR="$( cd -P "$( dirname "$SOURCE" )" && pwd )"
- SOURCE="$(readlink "$SOURCE")"
- [[ $SOURCE != /* ]] && SOURCE="$DIR/$SOURCE" # if $SOURCE was a relative symlink, we need to resolve it relative to the path where the symlink file was located
- done
- SCRIPTDIR="$( cd -P "$( dirname "$SOURCE" )" && pwd )"
-
- BASEDIR="${SCRIPTDIR}"
-
- # Create (identifiable) temporary files
- _mktemp() {
- # shellcheck disable=SC2068
- mktemp ${@:-} "${TMPDIR:-/tmp}/dehydrated-XXXXXX"
- }
-
- # Check for script dependencies
- check_dependencies() {
- # just execute some dummy and/or version commands to see if required tools exist and are actually usable
- openssl version > /dev/null 2>&1 || _exiterr "This script requires an openssl binary."
- _sed "" < /dev/null > /dev/null 2>&1 || _exiterr "This script requires sed with support for extended (modern) regular expressions."
- command -v grep > /dev/null 2>&1 || _exiterr "This script requires grep."
- command -v mktemp > /dev/null 2>&1 || _exiterr "This script requires mktemp."
- command -v diff > /dev/null 2>&1 || _exiterr "This script requires diff."
-
- # curl returns with an error code in some ancient versions so we have to catch that
- set +e
- curl -V > /dev/null 2>&1
- retcode="$?"
- set -e
- if [[ ! "${retcode}" = "0" ]] && [[ ! "${retcode}" = "2" ]]; then
- _exiterr "This script requires curl."
- fi
- }
-
- store_configvars() {
- __KEY_ALGO="${KEY_ALGO}"
- __OCSP_MUST_STAPLE="${OCSP_MUST_STAPLE}"
- __PRIVATE_KEY_RENEW="${PRIVATE_KEY_RENEW}"
- __KEYSIZE="${KEYSIZE}"
- __CHALLENGETYPE="${CHALLENGETYPE}"
- __HOOK="${HOOK}"
- __WELLKNOWN="${WELLKNOWN}"
- __HOOK_CHAIN="${HOOK_CHAIN}"
- __OPENSSL_CNF="${OPENSSL_CNF}"
- __RENEW_DAYS="${RENEW_DAYS}"
- __IP_VERSION="${IP_VERSION}"
- }
-
- reset_configvars() {
- KEY_ALGO="${__KEY_ALGO}"
- OCSP_MUST_STAPLE="${__OCSP_MUST_STAPLE}"
- PRIVATE_KEY_RENEW="${__PRIVATE_KEY_RENEW}"
- KEYSIZE="${__KEYSIZE}"
- CHALLENGETYPE="${__CHALLENGETYPE}"
- HOOK="${__HOOK}"
- WELLKNOWN="${__WELLKNOWN}"
- HOOK_CHAIN="${__HOOK_CHAIN}"
- OPENSSL_CNF="${__OPENSSL_CNF}"
- RENEW_DAYS="${__RENEW_DAYS}"
- IP_VERSION="${__IP_VERSION}"
- }
-
- # verify configuration values
- verify_config() {
- [[ "${CHALLENGETYPE}" =~ (http-01|dns-01) ]] || _exiterr "Unknown challenge type ${CHALLENGETYPE}... can not continue."
- if [[ "${CHALLENGETYPE}" = "dns-01" ]] && [[ -z "${HOOK}" ]]; then
- _exiterr "Challenge type dns-01 needs a hook script for deployment... can not continue."
- fi
- if [[ "${CHALLENGETYPE}" = "http-01" && ! -d "${WELLKNOWN}" && ! "${COMMAND:-}" = "register" ]]; then
- _exiterr "WELLKNOWN directory doesn't exist, please create ${WELLKNOWN} and set appropriate permissions."
- fi
- [[ "${KEY_ALGO}" =~ ^(rsa|prime256v1|secp384r1)$ ]] || _exiterr "Unknown public key algorithm ${KEY_ALGO}... can not continue."
- if [[ -n "${IP_VERSION}" ]]; then
- [[ "${IP_VERSION}" = "4" || "${IP_VERSION}" = "6" ]] || _exiterr "Unknown IP version ${IP_VERSION}... can not continue."
- fi
- }
-
- # Setup default config values, search for and load configuration files
- load_config() {
- # Check for config in various locations
- if [[ -z "${CONFIG:-}" ]]; then
- for check_config in "/etc/dehydrated" "/usr/local/etc/dehydrated" "${PWD}" "${SCRIPTDIR}"; do
- if [[ -f "${check_config}/config" ]]; then
- BASEDIR="${check_config}"
- CONFIG="${check_config}/config"
- break
- fi
- done
- fi
-
- # Default values
- CA="https://acme-v01.api.letsencrypt.org/directory"
- CA_TERMS="https://acme-v01.api.letsencrypt.org/terms"
- LICENSE=
- CERTDIR=
- ACCOUNTDIR=
- CHALLENGETYPE="http-01"
- CONFIG_D=
- DOMAINS_D=
- DOMAINS_TXT=
- HOOK=
- HOOK_CHAIN="no"
- RENEW_DAYS="30"
- KEYSIZE="4096"
- WELLKNOWN=
- PRIVATE_KEY_RENEW="yes"
- PRIVATE_KEY_ROLLOVER="no"
- KEY_ALGO=rsa
- OPENSSL_CNF="$(openssl version -d | cut -d\" -f2)/openssl.cnf"
- CONTACT_EMAIL=
- LOCKFILE=
- OCSP_MUST_STAPLE="no"
- IP_VERSION=
-
- if [[ -z "${CONFIG:-}" ]]; then
- echo "#" >&2
- echo "# !! WARNING !! No main config file found, using default config!" >&2
- echo "#" >&2
- elif [[ -f "${CONFIG}" ]]; then
- echo "# INFO: Using main config file ${CONFIG}"
- BASEDIR="$(dirname "${CONFIG}")"
- # shellcheck disable=SC1090
- . "${CONFIG}"
- else
- _exiterr "Specified config file doesn't exist."
- fi
-
- if [[ -n "${CONFIG_D}" ]]; then
- if [[ ! -d "${CONFIG_D}" ]]; then
- _exiterr "The path ${CONFIG_D} specified for CONFIG_D does not point to a directory." >&2
- fi
-
- for check_config_d in "${CONFIG_D}"/*.sh; do
- if [[ ! -e "${check_config_d}" ]]; then
- echo "# !! WARNING !! Extra configuration directory ${CONFIG_D} exists, but no configuration found in it." >&2
- break
- elif [[ -f "${check_config_d}" ]] && [[ -r "${check_config_d}" ]]; then
- echo "# INFO: Using additional config file ${check_config_d}"
- # shellcheck disable=SC1090
- . "${check_config_d}"
- else
- _exiterr "Specified additional config ${check_config_d} is not readable or not a file at all." >&2
- fi
- done
- fi
-
- # Remove slash from end of BASEDIR. Mostly for cleaner outputs, doesn't change functionality.
- BASEDIR="${BASEDIR%%/}"
-
- # Check BASEDIR and set default variables
- [[ -d "${BASEDIR}" ]] || _exiterr "BASEDIR does not exist: ${BASEDIR}"
-
- CAHASH="$(echo "${CA}" | urlbase64)"
- [[ -z "${ACCOUNTDIR}" ]] && ACCOUNTDIR="${BASEDIR}/accounts"
- mkdir -p "${ACCOUNTDIR}/${CAHASH}"
- [[ -f "${ACCOUNTDIR}/${CAHASH}/config" ]] && . "${ACCOUNTDIR}/${CAHASH}/config"
- ACCOUNT_KEY="${ACCOUNTDIR}/${CAHASH}/account_key.pem"
- ACCOUNT_KEY_JSON="${ACCOUNTDIR}/${CAHASH}/registration_info.json"
-
- if [[ -f "${BASEDIR}/private_key.pem" ]] && [[ ! -f "${ACCOUNT_KEY}" ]]; then
- echo "! Moving private_key.pem to ${ACCOUNT_KEY}"
- mv "${BASEDIR}/private_key.pem" "${ACCOUNT_KEY}"
- fi
- if [[ -f "${BASEDIR}/private_key.json" ]] && [[ ! -f "${ACCOUNT_KEY_JSON}" ]]; then
- echo "! Moving private_key.json to ${ACCOUNT_KEY_JSON}"
- mv "${BASEDIR}/private_key.json" "${ACCOUNT_KEY_JSON}"
- fi
-
- [[ -z "${CERTDIR}" ]] && CERTDIR="${BASEDIR}/certs"
- [[ -z "${DOMAINS_TXT}" ]] && DOMAINS_TXT="${BASEDIR}/domains.txt"
- [[ -z "${WELLKNOWN}" ]] && WELLKNOWN="/var/www/dehydrated"
- [[ -z "${LOCKFILE}" ]] && LOCKFILE="${BASEDIR}/lock"
- [[ -n "${PARAM_LOCKFILE_SUFFIX:-}" ]] && LOCKFILE="${LOCKFILE}-${PARAM_LOCKFILE_SUFFIX}"
- [[ -n "${PARAM_NO_LOCK:-}" ]] && LOCKFILE=""
-
- [[ -n "${PARAM_HOOK:-}" ]] && HOOK="${PARAM_HOOK}"
- [[ -n "${PARAM_CERTDIR:-}" ]] && CERTDIR="${PARAM_CERTDIR}"
- [[ -n "${PARAM_CHALLENGETYPE:-}" ]] && CHALLENGETYPE="${PARAM_CHALLENGETYPE}"
- [[ -n "${PARAM_KEY_ALGO:-}" ]] && KEY_ALGO="${PARAM_KEY_ALGO}"
- [[ -n "${PARAM_OCSP_MUST_STAPLE:-}" ]] && OCSP_MUST_STAPLE="${PARAM_OCSP_MUST_STAPLE}"
- [[ -n "${PARAM_IP_VERSION:-}" ]] && IP_VERSION="${PARAM_IP_VERSION}"
-
- verify_config
- store_configvars
- }
-
- # Initialize system
- init_system() {
- load_config
-
- # Lockfile handling (prevents concurrent access)
- if [[ -n "${LOCKFILE}" ]]; then
- LOCKDIR="$(dirname "${LOCKFILE}")"
- [[ -w "${LOCKDIR}" ]] || _exiterr "Directory ${LOCKDIR} for LOCKFILE ${LOCKFILE} is not writable, aborting."
- ( set -C; date > "${LOCKFILE}" ) 2>/dev/null || _exiterr "Lock file '${LOCKFILE}' present, aborting."
- remove_lock() { rm -f "${LOCKFILE}"; }
- trap 'remove_lock' EXIT
- fi
-
- # Get CA URLs
- CA_DIRECTORY="$(http_request get "${CA}")"
- CA_NEW_CERT="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value new-cert)" &&
- CA_NEW_AUTHZ="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value new-authz)" &&
- CA_NEW_REG="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value new-reg)" &&
- # shellcheck disable=SC2015
- CA_REVOKE_CERT="$(printf "%s" "${CA_DIRECTORY}" | get_json_string_value revoke-cert)" ||
- _exiterr "Problem retrieving ACME/CA-URLs, check if your configured CA points to the directory entrypoint."
-
- # Export some environment variables to be used in hook script
- export WELLKNOWN BASEDIR CERTDIR CONFIG COMMAND
-
- # Checking for private key ...
- register_new_key="no"
- if [[ -n "${PARAM_ACCOUNT_KEY:-}" ]]; then
- # a private key was specified from the command line so use it for this run
- echo "Using private key ${PARAM_ACCOUNT_KEY} instead of account key"
- ACCOUNT_KEY="${PARAM_ACCOUNT_KEY}"
- ACCOUNT_KEY_JSON="${PARAM_ACCOUNT_KEY}.json"
- else
- # Check if private account key exists, if it doesn't exist yet generate a new one (rsa key)
- if [[ ! -e "${ACCOUNT_KEY}" ]]; then
- REAL_LICENSE="$(http_request head "${CA_TERMS}" | (grep Location: || true) | awk -F ': ' '{print $2}' | tr -d '\n\r')"
- if [[ -z "${REAL_LICENSE}" ]]; then
- printf '\n'
- printf 'Error retrieving terms of service from certificate authority.\n'
- printf 'Please set LICENSE in config manually.\n'
- exit 1
- fi
- if [[ ! "${LICENSE}" = "${REAL_LICENSE}" ]]; then
- if [[ "${PARAM_ACCEPT_TERMS:-}" = "yes" ]]; then
- LICENSE="${REAL_LICENSE}"
- else
- printf '\n'
- printf 'To use dehydrated with this certificate authority you have to agree to their terms of service which you can find here: %s\n\n' "${REAL_LICENSE}"
- printf 'To accept these terms of service run `%s --register --accept-terms`.\n' "${0}"
- exit 1
- fi
- fi
-
- echo "+ Generating account key..."
- _openssl genrsa -out "${ACCOUNT_KEY}" "${KEYSIZE}"
- register_new_key="yes"
- fi
- fi
- openssl rsa -in "${ACCOUNT_KEY}" -check 2>/dev/null > /dev/null || _exiterr "Account key is not valid, can not continue."
-
- # Get public components from private key and calculate thumbprint
- pubExponent64="$(printf '%x' "$(openssl rsa -in "${ACCOUNT_KEY}" -noout -text | awk '/publicExponent/ {print $2}')" | hex2bin | urlbase64)"
- pubMod64="$(openssl rsa -in "${ACCOUNT_KEY}" -noout -modulus | cut -d'=' -f2 | hex2bin | urlbase64)"
-
- thumbprint="$(printf '{"e":"%s","kty":"RSA","n":"%s"}' "${pubExponent64}" "${pubMod64}" | openssl dgst -sha256 -binary | urlbase64)"
-
- # If we generated a new private key in the step above we have to register it with the acme-server
- if [[ "${register_new_key}" = "yes" ]]; then
- echo "+ Registering account key with ACME server..."
- FAILED=false
-
- if [[ -z "${CA_NEW_REG}" ]]; then
- echo "Certificate authority doesn't allow registrations."
- FAILED=true
- fi
-
- # If an email for the contact has been provided then adding it to the registration request
- if [[ "${FAILED}" = "false" ]]; then
- if [[ -n "${CONTACT_EMAIL}" ]]; then
- (signed_request "${CA_NEW_REG}" '{"resource": "new-reg", "contact":["mailto:'"${CONTACT_EMAIL}"'"], "agreement": "'"$LICENSE"'"}' > "${ACCOUNT_KEY_JSON}") || FAILED=true
- else
- (signed_request "${CA_NEW_REG}" '{"resource": "new-reg", "agreement": "'"$LICENSE"'"}' > "${ACCOUNT_KEY_JSON}") || FAILED=true
- fi
- fi
-
- if [[ "${FAILED}" = "true" ]]; then
- echo
- echo
- echo "Error registering account key. See message above for more information."
- rm "${ACCOUNT_KEY}" "${ACCOUNT_KEY_JSON}"
- exit 1
- fi
- elif [[ "${COMMAND:-}" = "register" ]]; then
- echo "+ Account already registered!"
- exit 0
- fi
- }
-
- # Different sed version for different os types...
- _sed() {
- if [[ "${OSTYPE}" = "Linux" ]]; then
- sed -r "${@}"
- else
- sed -E "${@}"
- fi
- }
-
- # Print error message and exit with error
- _exiterr() {
- echo "ERROR: ${1}" >&2
- exit 1
- }
-
- # Remove newlines and whitespace from json
- clean_json() {
- tr -d '\r\n' | _sed -e 's/ +/ /g' -e 's/\{ /{/g' -e 's/ \}/}/g' -e 's/\[ /[/g' -e 's/ \]/]/g'
- }
-
- # Encode data as url-safe formatted base64
- urlbase64() {
- # urlbase64: base64 encoded string with '+' replaced with '-' and '/' replaced with '_'
- openssl base64 -e | tr -d '\n\r' | _sed -e 's:=*$::g' -e 'y:+/:-_:'
- }
-
- # Convert hex string to binary data
- hex2bin() {
- # Remove spaces, add leading zero, escape as hex string and parse with printf
- printf -- "$(cat | _sed -e 's/[[:space:]]//g' -e 's/^(.(.{2})*)$/0\1/' -e 's/(.{2})/\\x\1/g')"
- }
-
- # Get string value from json dictionary
- get_json_string_value() {
- local filter
- filter=$(printf 's/.*"%s": *"\([^"]*\)".*/\\1/p' "$1")
- sed -n "${filter}"
- }
-
- rm_json_arrays() {
- local filter
- filter='s/\[[^][]*\]/null/g'
- # remove three levels of nested arrays
- sed -e "${filter}" -e "${filter}" -e "${filter}"
- }
-
- # OpenSSL writes to stderr/stdout even when there are no errors. So just
- # display the output if the exit code was != 0 to simplify debugging.
- _openssl() {
- set +e
- out="$(openssl "${@}" 2>&1)"
- res=$?
- set -e
- if [[ ${res} -ne 0 ]]; then
- echo " + ERROR: failed to run $* (Exitcode: ${res})" >&2
- echo >&2
- echo "Details:" >&2
- echo "${out}" >&2
- echo >&2
- exit ${res}
- fi
- }
-
- # Send http(s) request with specified method
- http_request() {
- tempcont="$(_mktemp)"
-
- if [[ -n "${IP_VERSION:-}" ]]; then
- ip_version="-${IP_VERSION}"
- fi
-
- set +e
- if [[ "${1}" = "head" ]]; then
- statuscode="$(curl ${ip_version:-} -s -w "%{http_code}" -o "${tempcont}" "${2}" -I)"
- curlret="${?}"
- elif [[ "${1}" = "get" ]]; then
- statuscode="$(curl ${ip_version:-} -s -w "%{http_code}" -o "${tempcont}" "${2}")"
- curlret="${?}"
- elif [[ "${1}" = "post" ]]; then
- statuscode="$(curl ${ip_version:-} -s -w "%{http_code}" -o "${tempcont}" "${2}" -d "${3}")"
- curlret="${?}"
- else
- set -e
- _exiterr "Unknown request method: ${1}"
- fi
- set -e
-
- if [[ ! "${curlret}" = "0" ]]; then
- _exiterr "Problem connecting to server (${1} for ${2}; curl returned with ${curlret})"
- fi
-
- if [[ ! "${statuscode:0:1}" = "2" ]]; then
- if [[ ! "${2}" = "${CA_TERMS}" ]] || [[ ! "${statuscode:0:1}" = "3" ]]; then
- echo " + ERROR: An error occurred while sending ${1}-request to ${2} (Status ${statuscode})" >&2
- echo >&2
- echo "Details:" >&2
- cat "${tempcont}" >&2
- echo >&2
- echo >&2
-
- # An exclusive hook for the {1}-request error might be useful (e.g., for sending an e-mail to admins)
- if [[ -n "${HOOK}" ]] && [[ "${HOOK_CHAIN}" != "yes" ]]; then
- errtxt=`cat ${tempcont}`
- "${HOOK}" "request_failure" "${statuscode}" "${errtxt}" "${1}"
- fi
-
- rm -f "${tempcont}"
-
- # Wait for hook script to clean the challenge if used
- if [[ -n "${HOOK}" ]] && [[ "${HOOK_CHAIN}" != "yes" ]] && [[ -n "${challenge_token:+set}" ]]; then
- "${HOOK}" "clean_challenge" '' "${challenge_token}" "${keyauth}"
- fi
-
- # remove temporary domains.txt file if used
- [[ -n "${PARAM_DOMAIN:-}" && -n "${DOMAINS_TXT:-}" ]] && rm "${DOMAINS_TXT}"
- exit 1
- fi
- fi
-
- cat "${tempcont}"
- rm -f "${tempcont}"
- }
-
- # Send signed request
- signed_request() {
- # Encode payload as urlbase64
- payload64="$(printf '%s' "${2}" | urlbase64)"
-
- # Retrieve nonce from acme-server
- nonce="$(http_request head "${CA}" | grep Replay-Nonce: | awk -F ': ' '{print $2}' | tr -d '\n\r')"
-
- # Build header with just our public key and algorithm information
- header='{"alg": "RS256", "jwk": {"e": "'"${pubExponent64}"'", "kty": "RSA", "n": "'"${pubMod64}"'"}}'
-
- # Build another header which also contains the previously received nonce and encode it as urlbase64
- protected='{"alg": "RS256", "jwk": {"e": "'"${pubExponent64}"'", "kty": "RSA", "n": "'"${pubMod64}"'"}, "nonce": "'"${nonce}"'"}'
- protected64="$(printf '%s' "${protected}" | urlbase64)"
-
- # Sign header with nonce and our payload with our private key and encode signature as urlbase64
- signed64="$(printf '%s' "${protected64}.${payload64}" | openssl dgst -sha256 -sign "${ACCOUNT_KEY}" | urlbase64)"
-
- # Send header + extended header + payload + signature to the acme-server
- data='{"header": '"${header}"', "protected": "'"${protected64}"'", "payload": "'"${payload64}"'", "signature": "'"${signed64}"'"}'
-
- http_request post "${1}" "${data}"
- }
-
- # Extracts all subject names from a CSR
- # Outputs either the CN, or the SANs, one per line
- extract_altnames() {
- csr="${1}" # the CSR itself (not a file)
-
- if ! <<<"${csr}" openssl req -verify -noout 2>/dev/null; then
- _exiterr "Certificate signing request isn't valid"
- fi
-
- reqtext="$( <<<"${csr}" openssl req -noout -text )"
- if <<<"${reqtext}" grep -q '^[[:space:]]*X509v3 Subject Alternative Name:[[:space:]]*$'; then
- # SANs used, extract these
- altnames="$( <<<"${reqtext}" awk '/X509v3 Subject Alternative Name:/{print;getline;print;}' | tail -n1 )"
- # split to one per line:
- # shellcheck disable=SC1003
- altnames="$( <<<"${altnames}" _sed -e 's/^[[:space:]]*//; s/, /\'$'\n''/g' )"
- # we can only get DNS: ones signed
- if grep -qv '^DNS:' <<<"${altnames}"; then
- _exiterr "Certificate signing request contains non-DNS Subject Alternative Names"
- fi
- # strip away the DNS: prefix
- altnames="$( <<<"${altnames}" _sed -e 's/^DNS://' )"
- echo "${altnames}"
-
- else
- # No SANs, extract CN
- altnames="$( <<<"${reqtext}" grep '^[[:space:]]*Subject:' | _sed -e 's/.* CN=([^ /,]*).*/\1/' )"
- echo "${altnames}"
- fi
- }
-
- # Create certificate for domain(s) and outputs it FD 3
- sign_csr() {
- csr="${1}" # the CSR itself (not a file)
-
- if { true >&3; } 2>/dev/null; then
- : # fd 3 looks OK
- else
- _exiterr "sign_csr: FD 3 not open"
- fi
-
- shift 1 || true
- altnames="${*:-}"
- if [ -z "${altnames}" ]; then
- altnames="$( extract_altnames "${csr}" )"
- fi
-
- if [[ -z "${CA_NEW_AUTHZ}" ]] || [[ -z "${CA_NEW_CERT}" ]]; then
- _exiterr "Certificate authority doesn't allow certificate signing"
- fi
-
- local idx=0
- if [[ -n "${ZSH_VERSION:-}" ]]; then
- local -A challenge_altnames challenge_uris challenge_tokens keyauths deploy_args
- else
- local -a challenge_altnames challenge_uris challenge_tokens keyauths deploy_args
- fi
-
- # Request challenges
- for altname in ${altnames}; do
- # Ask the acme-server for new challenge token and extract them from the resulting json block
- echo " + Requesting challenge for ${altname}..."
- response="$(signed_request "${CA_NEW_AUTHZ}" '{"resource": "new-authz", "identifier": {"type": "dns", "value": "'"${altname}"'"}}' | clean_json)"
-
- challenge_status="$(printf '%s' "${response}" | rm_json_arrays | get_json_string_value status)"
- if [ "${challenge_status}" = "valid" ]; then
- echo " + Already validated!"
- continue
- fi
-
- challenges="$(printf '%s\n' "${response}" | sed -n 's/.*\("challenges":[^\[]*\[[^]]*]\).*/\1/p')"
- repl=$'\n''{' # fix syntax highlighting in Vim
- challenge="$(printf "%s" "${challenges//\{/${repl}}" | grep \""${CHALLENGETYPE}"\")"
- challenge_token="$(printf '%s' "${challenge}" | get_json_string_value token | _sed 's/[^A-Za-z0-9_\-]/_/g')"
- challenge_uri="$(printf '%s' "${challenge}" | get_json_string_value uri)"
-
- if [[ -z "${challenge_token}" ]] || [[ -z "${challenge_uri}" ]]; then
- _exiterr "Can't retrieve challenges (${response})"
- fi
-
- # Challenge response consists of the challenge token and the thumbprint of our public certificate
- keyauth="${challenge_token}.${thumbprint}"
-
- case "${CHALLENGETYPE}" in
- "http-01")
- # Store challenge response in well-known location and make world-readable (so that a webserver can access it)
- printf '%s' "${keyauth}" > "${WELLKNOWN}/${challenge_token}"
- chmod a+r "${WELLKNOWN}/${challenge_token}"
- keyauth_hook="${keyauth}"
- ;;
- "dns-01")
- # Generate DNS entry content for dns-01 validation
- keyauth_hook="$(printf '%s' "${keyauth}" | openssl dgst -sha256 -binary | urlbase64)"
- ;;
- esac
-
- challenge_altnames[${idx}]="${altname}"
- challenge_uris[${idx}]="${challenge_uri}"
- keyauths[${idx}]="${keyauth}"
- challenge_tokens[${idx}]="${challenge_token}"
- # Note: assumes args will never have spaces!
- deploy_args[${idx}]="${altname} ${challenge_token} ${keyauth_hook}"
- idx=$((idx+1))
- done
- challenge_count="${idx}"
-
- # Wait for hook script to deploy the challenges if used
- if [[ ${challenge_count} -ne 0 ]]; then
- # shellcheck disable=SC2068
- [[ -n "${HOOK}" ]] && [[ "${HOOK_CHAIN}" = "yes" ]] && "${HOOK}" "deploy_challenge" ${deploy_args[@]}
- fi
-
- # Respond to challenges
- reqstatus="valid"
- idx=0
- if [ ${challenge_count} -ne 0 ]; then
- for altname in "${challenge_altnames[@]:0}"; do
- challenge_token="${challenge_tokens[${idx}]}"
- keyauth="${keyauths[${idx}]}"
-
- # Wait for hook script to deploy the challenge if used
- # shellcheck disable=SC2086
- [[ -n "${HOOK}" ]] && [[ "${HOOK_CHAIN}" != "yes" ]] && "${HOOK}" "deploy_challenge" ${deploy_args[${idx}]}
-
- # Ask the acme-server to verify our challenge and wait until it is no longer pending
- echo " + Responding to challenge for ${altname}..."
- result="$(signed_request "${challenge_uris[${idx}]}" '{"resource": "challenge", "keyAuthorization": "'"${keyauth}"'"}' | clean_json)"
-
- reqstatus="$(printf '%s\n' "${result}" | get_json_string_value status)"
-
- while [[ "${reqstatus}" = "pending" ]]; do
- sleep 1
- result="$(http_request get "${challenge_uris[${idx}]}")"
- reqstatus="$(printf '%s\n' "${result}" | get_json_string_value status)"
- done
-
- [[ "${CHALLENGETYPE}" = "http-01" ]] && rm -f "${WELLKNOWN}/${challenge_token}"
-
- # Wait for hook script to clean the challenge if used
- if [[ -n "${HOOK}" ]] && [[ "${HOOK_CHAIN}" != "yes" ]] && [[ -n "${challenge_token}" ]]; then
- # shellcheck disable=SC2086
- "${HOOK}" "clean_challenge" ${deploy_args[${idx}]}
- fi
- idx=$((idx+1))
-
- if [[ "${reqstatus}" = "valid" ]]; then
- echo " + Challenge is valid!"
- else
- [[ -n "${HOOK}" ]] && [[ "${HOOK_CHAIN}" != "yes" ]] && "${HOOK}" "invalid_challenge" "${altname}" "${result}"
- fi
- done
- fi
-
- # Wait for hook script to clean the challenges if used
- # shellcheck disable=SC2068
- if [[ ${challenge_count} -ne 0 ]]; then
- [[ -n "${HOOK}" ]] && [[ "${HOOK_CHAIN}" = "yes" ]] && "${HOOK}" "clean_challenge" ${deploy_args[@]}
- fi
-
- if [[ "${reqstatus}" != "valid" ]]; then
- # Clean up any remaining challenge_tokens if we stopped early
- if [[ "${CHALLENGETYPE}" = "http-01" ]] && [[ ${challenge_count} -ne 0 ]]; then
- while [ ${idx} -lt ${#challenge_tokens[@]} ]; do
- rm -f "${WELLKNOWN}/${challenge_tokens[${idx}]}"
- idx=$((idx+1))
- done
- fi
-
- _exiterr "Challenge is invalid! (returned: ${reqstatus}) (result: ${result})"
- fi
-
- # Finally request certificate from the acme-server and store it in cert-${timestamp}.pem and link from cert.pem
- echo " + Requesting certificate..."
- csr64="$( <<<"${csr}" openssl req -outform DER | urlbase64)"
- crt64="$(signed_request "${CA_NEW_CERT}" '{"resource": "new-cert", "csr": "'"${csr64}"'"}' | openssl base64 -e)"
- crt="$( printf -- '-----BEGIN CERTIFICATE-----\n%s\n-----END CERTIFICATE-----\n' "${crt64}" )"
-
- # Try to load the certificate to detect corruption
- echo " + Checking certificate..."
- _openssl x509 -text <<<"${crt}"
-
- echo "${crt}" >&3
-
- unset challenge_token
- echo " + Done!"
- }
-
- # grep issuer cert uri from certificate
- get_issuer_cert_uri() {
- certificate="${1}"
- openssl x509 -in "${certificate}" -noout -text | (grep 'CA Issuers - URI:' | cut -d':' -f2-) || true
- }
-
- # walk certificate chain, retrieving all intermediate certificates
- walk_chain() {
- local certificate
- certificate="${1}"
-
- local issuer_cert_uri
- issuer_cert_uri="${2:-}"
- if [[ -z "${issuer_cert_uri}" ]]; then issuer_cert_uri="$(get_issuer_cert_uri "${certificate}")"; fi
- if [[ -n "${issuer_cert_uri}" ]]; then
- # create temporary files
- local tmpcert
- local tmpcert_raw
- tmpcert_raw="$(_mktemp)"
- tmpcert="$(_mktemp)"
-
- # download certificate
- http_request get "${issuer_cert_uri}" > "${tmpcert_raw}"
-
- # PEM
- if grep -q "BEGIN CERTIFICATE" "${tmpcert_raw}"; then mv "${tmpcert_raw}" "${tmpcert}"
- # DER
- elif openssl x509 -in "${tmpcert_raw}" -inform DER -out "${tmpcert}" -outform PEM 2> /dev/null > /dev/null; then :
- # PKCS7
- elif openssl pkcs7 -in "${tmpcert_raw}" -inform DER -out "${tmpcert}" -outform PEM -print_certs 2> /dev/null > /dev/null; then :
- # Unknown certificate type
- else _exiterr "Unknown certificate type in chain"
- fi
-
- local next_issuer_cert_uri
- next_issuer_cert_uri="$(get_issuer_cert_uri "${tmpcert}")"
- if [[ -n "${next_issuer_cert_uri}" ]]; then
- printf "\n%s\n" "${issuer_cert_uri}"
- cat "${tmpcert}"
- walk_chain "${tmpcert}" "${next_issuer_cert_uri}"
- fi
- rm -f "${tmpcert}" "${tmpcert_raw}"
- fi
- }
-
- # Create certificate for domain(s)
- sign_domain() {
- domain="${1}"
- altnames="${*}"
- timestamp="$(date +%s)"
-
- echo " + Signing domains..."
- if [[ -z "${CA_NEW_AUTHZ}" ]] || [[ -z "${CA_NEW_CERT}" ]]; then
- _exiterr "Certificate authority doesn't allow certificate signing"
- fi
-
- # If there is no existing certificate directory => make it
- if [[ ! -e "${CERTDIR}/${domain}" ]]; then
- echo " + Creating new directory ${CERTDIR}/${domain} ..."
- mkdir -p "${CERTDIR}/${domain}" || _exiterr "Unable to create directory ${CERTDIR}/${domain}"
- fi
-
- privkey="privkey.pem"
- # generate a new private key if we need or want one
- if [[ ! -r "${CERTDIR}/${domain}/privkey.pem" ]] || [[ "${PRIVATE_KEY_RENEW}" = "yes" ]]; then
- echo " + Generating private key..."
- privkey="privkey-${timestamp}.pem"
- case "${KEY_ALGO}" in
- rsa) _openssl genrsa -out "${CERTDIR}/${domain}/privkey-${timestamp}.pem" "${KEYSIZE}";;
- prime256v1|secp384r1) _openssl ecparam -genkey -name "${KEY_ALGO}" -out "${CERTDIR}/${domain}/privkey-${timestamp}.pem";;
- esac
- fi
- # move rolloverkey into position (if any)
- if [[ -r "${CERTDIR}/${domain}/privkey.pem" && -r "${CERTDIR}/${domain}/privkey.roll.pem" && "${PRIVATE_KEY_RENEW}" = "yes" && "${PRIVATE_KEY_ROLLOVER}" = "yes" ]]; then
- echo " + Moving Rolloverkey into position.... "
- mv "${CERTDIR}/${domain}/privkey.roll.pem" "${CERTDIR}/${domain}/privkey-tmp.pem"
- mv "${CERTDIR}/${domain}/privkey-${timestamp}.pem" "${CERTDIR}/${domain}/privkey.roll.pem"
- mv "${CERTDIR}/${domain}/privkey-tmp.pem" "${CERTDIR}/${domain}/privkey-${timestamp}.pem"
- fi
- # generate a new private rollover key if we need or want one
- if [[ ! -r "${CERTDIR}/${domain}/privkey.roll.pem" && "${PRIVATE_KEY_ROLLOVER}" = "yes" && "${PRIVATE_KEY_RENEW}" = "yes" ]]; then
- echo " + Generating private rollover key..."
- case "${KEY_ALGO}" in
- rsa) _openssl genrsa -out "${CERTDIR}/${domain}/privkey.roll.pem" "${KEYSIZE}";;
- prime256v1|secp384r1) _openssl ecparam -genkey -name "${KEY_ALGO}" -out "${CERTDIR}/${domain}/privkey.roll.pem";;
- esac
- fi
- # delete rolloverkeys if disabled
- if [[ -r "${CERTDIR}/${domain}/privkey.roll.pem" && ! "${PRIVATE_KEY_ROLLOVER}" = "yes" ]]; then
- echo " + Removing Rolloverkey (feature disabled)..."
- rm -f "${CERTDIR}/${domain}/privkey.roll.pem"
- fi
-
- # Generate signing request config and the actual signing request
- echo " + Generating signing request..."
- SAN=""
- for altname in ${altnames}; do
- SAN+="DNS:${altname}, "
- done
- SAN="${SAN%%, }"
- local tmp_openssl_cnf
- tmp_openssl_cnf="$(_mktemp)"
- cat "${OPENSSL_CNF}" > "${tmp_openssl_cnf}"
- printf "[SAN]\nsubjectAltName=%s" "${SAN}" >> "${tmp_openssl_cnf}"
- if [ "${OCSP_MUST_STAPLE}" = "yes" ]; then
- printf "\n1.3.6.1.5.5.7.1.24=DER:30:03:02:01:05" >> "${tmp_openssl_cnf}"
- fi
- openssl req -new -sha256 -key "${CERTDIR}/${domain}/${privkey}" -out "${CERTDIR}/${domain}/cert-${timestamp}.csr" -subj "/CN=${domain}/" -reqexts SAN -config "${tmp_openssl_cnf}"
- rm -f "${tmp_openssl_cnf}"
-
- crt_path="${CERTDIR}/${domain}/cert-${timestamp}.pem"
- # shellcheck disable=SC2086
- sign_csr "$(< "${CERTDIR}/${domain}/cert-${timestamp}.csr" )" ${altnames} 3>"${crt_path}"
-
- # Create fullchain.pem
- echo " + Creating fullchain.pem..."
- cat "${crt_path}" > "${CERTDIR}/${domain}/fullchain-${timestamp}.pem"
- walk_chain "${crt_path}" > "${CERTDIR}/${domain}/chain-${timestamp}.pem"
- cat "${CERTDIR}/${domain}/chain-${timestamp}.pem" >> "${CERTDIR}/${domain}/fullchain-${timestamp}.pem"
-
- # Update symlinks
- [[ "${privkey}" = "privkey.pem" ]] || ln -sf "privkey-${timestamp}.pem" "${CERTDIR}/${domain}/privkey.pem"
-
- ln -sf "chain-${timestamp}.pem" "${CERTDIR}/${domain}/chain.pem"
- ln -sf "fullchain-${timestamp}.pem" "${CERTDIR}/${domain}/fullchain.pem"
- ln -sf "cert-${timestamp}.csr" "${CERTDIR}/${domain}/cert.csr"
- ln -sf "cert-${timestamp}.pem" "${CERTDIR}/${domain}/cert.pem"
-
- # Wait for hook script to clean the challenge and to deploy cert if used
- [[ -n "${HOOK}" ]] && "${HOOK}" "deploy_cert" "${domain}" "${CERTDIR}/${domain}/privkey.pem" "${CERTDIR}/${domain}/cert.pem" "${CERTDIR}/${domain}/fullchain.pem" "${CERTDIR}/${domain}/chain.pem" "${timestamp}"
-
- unset challenge_token
- echo " + Done!"
- }
-
- # Usage: --register
- # Description: Register account key
- command_register() {
- init_system
- echo "+ Done!"
- exit 0
- }
-
- # Usage: --cron (-c)
- # Description: Sign/renew non-existant/changed/expiring certificates.
- command_sign_domains() {
- init_system
-
- if [[ -n "${PARAM_DOMAIN:-}" ]]; then
- DOMAINS_TXT="$(_mktemp)"
- printf -- "${PARAM_DOMAIN}" > "${DOMAINS_TXT}"
- elif [[ -e "${DOMAINS_TXT}" ]]; then
- if [[ ! -r "${DOMAINS_TXT}" ]]; then
- _exiterr "domains.txt found but not readable"
- fi
- else
- _exiterr "domains.txt not found and --domain not given"
- fi
-
- # Generate certificates for all domains found in domains.txt. Check if existing certificate are about to expire
- ORIGIFS="${IFS}"
- IFS=$'\n'
- for line in $(<"${DOMAINS_TXT}" tr -d '\r' | awk '{print tolower($0)}' | _sed -e 's/^[[:space:]]*//g' -e 's/[[:space:]]*$//g' -e 's/[[:space:]]+/ /g' | (grep -vE '^(#|$)' || true)); do
- reset_configvars
- IFS="${ORIGIFS}"
- domain="$(printf '%s\n' "${line}" | cut -d' ' -f1)"
- morenames="$(printf '%s\n' "${line}" | cut -s -d' ' -f2-)"
- cert="${CERTDIR}/${domain}/cert.pem"
-
- force_renew="${PARAM_FORCE:-no}"
-
- if [[ -z "${morenames}" ]];then
- echo "Processing ${domain}"
- else
- echo "Processing ${domain} with alternative names: ${morenames}"
- fi
-
- # read cert config
- # for now this loads the certificate specific config in a subshell and parses a diff of set variables.
- # we could just source the config file but i decided to go this way to protect people from accidentally overriding
- # variables used internally by this script itself.
- if [[ -n "${DOMAINS_D}" ]]; then
- certconfig="${DOMAINS_D}/${domain}"
- else
- certconfig="${CERTDIR}/${domain}/config"
- fi
-
- if [ -f "${certconfig}" ]; then
- echo " + Using certificate specific config file!"
- ORIGIFS="${IFS}"
- IFS=$'\n'
- for cfgline in $(
- beforevars="$(_mktemp)"
- aftervars="$(_mktemp)"
- set > "${beforevars}"
- # shellcheck disable=SC1090
- . "${certconfig}"
- set > "${aftervars}"
- diff -u "${beforevars}" "${aftervars}" | grep -E '^\+[^+]'
- rm "${beforevars}"
- rm "${aftervars}"
- ); do
- config_var="$(echo "${cfgline:1}" | cut -d'=' -f1)"
- config_value="$(echo "${cfgline:1}" | cut -d'=' -f2-)"
- case "${config_var}" in
- KEY_ALGO|OCSP_MUST_STAPLE|PRIVATE_KEY_RENEW|PRIVATE_KEY_ROLLOVER|KEYSIZE|CHALLENGETYPE|HOOK|WELLKNOWN|HOOK_CHAIN|OPENSSL_CNF|RENEW_DAYS)
- echo " + ${config_var} = ${config_value}"
- declare -- "${config_var}=${config_value}"
- ;;
- _) ;;
- *) echo " ! Setting ${config_var} on a per-certificate base is not (yet) supported"
- esac
- done
- IFS="${ORIGIFS}"
- fi
- verify_config
- export WELLKNOWN CHALLENGETYPE KEY_ALGO PRIVATE_KEY_ROLLOVER
-
- if [[ -e "${cert}" ]]; then
- printf " + Checking domain name(s) of existing cert..."
-
- certnames="$(openssl x509 -in "${cert}" -text -noout | grep DNS: | _sed 's/DNS://g' | tr -d ' ' | tr ',' '\n' | sort -u | tr '\n' ' ' | _sed 's/ $//')"
- givennames="$(echo "${domain}" "${morenames}"| tr ' ' '\n' | sort -u | tr '\n' ' ' | _sed 's/ $//' | _sed 's/^ //')"
-
- if [[ "${certnames}" = "${givennames}" ]]; then
- echo " unchanged."
- else
- echo " changed!"
- echo " + Domain name(s) are not matching!"
- echo " + Names in old certificate: ${certnames}"
- echo " + Configured names: ${givennames}"
- echo " + Forcing renew."
- force_renew="yes"
- fi
- fi
-
- if [[ -e "${cert}" ]]; then
- echo " + Checking expire date of existing cert..."
- valid="$(openssl x509 -enddate -noout -in "${cert}" | cut -d= -f2- )"
-
- printf " + Valid till %s " "${valid}"
- if openssl x509 -checkend $((RENEW_DAYS * 86400)) -noout -in "${cert}"; then
- printf "(Longer than %d days). " "${RENEW_DAYS}"
- if [[ "${force_renew}" = "yes" ]]; then
- echo "Ignoring because renew was forced!"
- else
- # Certificate-Names unchanged and cert is still valid
- echo "Skipping renew!"
- [[ -n "${HOOK}" ]] && "${HOOK}" "unchanged_cert" "${domain}" "${CERTDIR}/${domain}/privkey.pem" "${CERTDIR}/${domain}/cert.pem" "${CERTDIR}/${domain}/fullchain.pem" "${CERTDIR}/${domain}/chain.pem"
- continue
- fi
- else
- echo "(Less than ${RENEW_DAYS} days). Renewing!"
- fi
- fi
-
- # shellcheck disable=SC2086
- if [[ "${PARAM_KEEP_GOING:-}" = "yes" ]]; then
- sign_domain ${line} &
- wait $! || true
- else
- sign_domain ${line}
- fi
- done
-
- # remove temporary domains.txt file if used
- [[ -n "${PARAM_DOMAIN:-}" ]] && rm -f "${DOMAINS_TXT}"
-
- [[ -n "${HOOK}" ]] && "${HOOK}" "exit_hook"
- exit 0
- }
-
- # Usage: --signcsr (-s) path/to/csr.pem
- # Description: Sign a given CSR, output CRT on stdout (advanced usage)
- command_sign_csr() {
- # redirect stdout to stderr
- # leave stdout over at fd 3 to output the cert
- exec 3>&1 1>&2
-
- init_system
-
- csrfile="${1}"
- if [ ! -r "${csrfile}" ]; then
- _exiterr "Could not read certificate signing request ${csrfile}"
- fi
-
- # gen cert
- certfile="$(_mktemp)"
- sign_csr "$(< "${csrfile}" )" 3> "${certfile}"
-
- # print cert
- echo "# CERT #" >&3
- cat "${certfile}" >&3
- echo >&3
-
- # print chain
- if [ -n "${PARAM_FULL_CHAIN:-}" ]; then
- # get and convert ca cert
- chainfile="$(_mktemp)"
- tmpchain="$(_mktemp)"
- http_request get "$(openssl x509 -in "${certfile}" -noout -text | grep 'CA Issuers - URI:' | cut -d':' -f2-)" > "${tmpchain}"
- if grep -q "BEGIN CERTIFICATE" "${tmpchain}"; then
- mv "${tmpchain}" "${chainfile}"
- else
- openssl x509 -in "${tmpchain}" -inform DER -out "${chainfile}" -outform PEM
- rm "${tmpchain}"
- fi
-
- echo "# CHAIN #" >&3
- cat "${chainfile}" >&3
-
- rm "${chainfile}"
- fi
-
- # cleanup
- rm "${certfile}"
-
- exit 0
- }
-
- # Usage: --revoke (-r) path/to/cert.pem
- # Description: Revoke specified certificate
- command_revoke() {
- init_system
-
- [[ -n "${CA_REVOKE_CERT}" ]] || _exiterr "Certificate authority doesn't allow certificate revocation."
-
- cert="${1}"
- if [[ -L "${cert}" ]]; then
- # follow symlink and use real certificate name (so we move the real file and not the symlink at the end)
- local link_target
- link_target="$(readlink -n "${cert}")"
- if [[ "${link_target}" =~ ^/ ]]; then
- cert="${link_target}"
- else
- cert="$(dirname "${cert}")/${link_target}"
- fi
- fi
- [[ -f "${cert}" ]] || _exiterr "Could not find certificate ${cert}"
-
- echo "Revoking ${cert}"
-
- cert64="$(openssl x509 -in "${cert}" -inform PEM -outform DER | urlbase64)"
- response="$(signed_request "${CA_REVOKE_CERT}" '{"resource": "revoke-cert", "certificate": "'"${cert64}"'"}' | clean_json)"
- # if there is a problem with our revoke request _request (via signed_request) will report this and "exit 1" out
- # so if we are here, it is safe to assume the request was successful
- echo " + Done."
- echo " + Renaming certificate to ${cert}-revoked"
- mv -f "${cert}" "${cert}-revoked"
- }
-
- # Usage: --cleanup (-gc)
- # Description: Move unused certificate files to archive directory
- command_cleanup() {
- load_config
-
- # Create global archive directory if not existant
- if [[ ! -e "${BASEDIR}/archive" ]]; then
- mkdir "${BASEDIR}/archive"
- fi
-
- # Loop over all certificate directories
- for certdir in "${CERTDIR}/"*; do
- # Skip if entry is not a folder
- [[ -d "${certdir}" ]] || continue
-
- # Get certificate name
- certname="$(basename "${certdir}")"
-
- # Create certitifaces archive directory if not existant
- archivedir="${BASEDIR}/archive/${certname}"
- if [[ ! -e "${archivedir}" ]]; then
- mkdir "${archivedir}"
- fi
-
- # Loop over file-types (certificates, keys, signing-requests, ...)
- for filetype in cert.csr cert.pem chain.pem fullchain.pem privkey.pem; do
- # Skip if symlink is broken
- [[ -r "${certdir}/${filetype}" ]] || continue
-
- # Look up current file in use
- current="$(basename "$(readlink "${certdir}/${filetype}")")"
-
- # Split filetype into name and extension
- filebase="$(echo "${filetype}" | cut -d. -f1)"
- fileext="$(echo "${filetype}" | cut -d. -f2)"
-
- # Loop over all files of this type
- for file in "${certdir}/${filebase}-"*".${fileext}"; do
- # Handle case where no files match the wildcard
- [[ -f "${file}" ]] || break
-
- # Check if current file is in use, if unused move to archive directory
- filename="$(basename "${file}")"
- if [[ ! "${filename}" = "${current}" ]]; then
- echo "Moving unused file to archive directory: ${certname}/${filename}"
- mv "${certdir}/${filename}" "${archivedir}/${filename}"
- fi
- done
- done
- done
-
- exit 0
- }
-
- # Usage: --help (-h)
- # Description: Show help text
- command_help() {
- printf "Usage: %s [-h] [command [argument]] [parameter [argument]] [parameter [argument]] ...\n\n" "${0}"
- printf "Default command: help\n\n"
- echo "Commands:"
- grep -e '^[[:space:]]*# Usage:' -e '^[[:space:]]*# Description:' -e '^command_.*()[[:space:]]*{' "${0}" | while read -r usage; read -r description; read -r command; do
- if [[ ! "${usage}" =~ Usage ]] || [[ ! "${description}" =~ Description ]] || [[ ! "${command}" =~ ^command_ ]]; then
- _exiterr "Error generating help text."
- fi
- printf " %-32s %s\n" "${usage##"# Usage: "}" "${description##"# Description: "}"
- done
- printf -- "\nParameters:\n"
- grep -E -e '^[[:space:]]*# PARAM_Usage:' -e '^[[:space:]]*# PARAM_Description:' "${0}" | while read -r usage; read -r description; do
- if [[ ! "${usage}" =~ Usage ]] || [[ ! "${description}" =~ Description ]]; then
- _exiterr "Error generating help text."
- fi
- printf " %-32s %s\n" "${usage##"# PARAM_Usage: "}" "${description##"# PARAM_Description: "}"
- done
- }
-
- # Usage: --env (-e)
- # Description: Output configuration variables for use in other scripts
- command_env() {
- echo "# dehydrated configuration"
- load_config
- typeset -p CA LICENSE CERTDIR CHALLENGETYPE DOMAINS_D DOMAINS_TXT HOOK HOOK_CHAIN RENEW_DAYS ACCOUNT_KEY ACCOUNT_KEY_JSON KEYSIZE WELLKNOWN PRIVATE_KEY_RENEW OPENSSL_CNF CONTACT_EMAIL LOCKFILE
- }
-
- # Main method (parses script arguments and calls command_* methods)
- main() {
- COMMAND=""
- set_command() {
- [[ -z "${COMMAND}" ]] || _exiterr "Only one command can be executed at a time. See help (-h) for more information."
- COMMAND="${1}"
- }
-
- check_parameters() {
- if [[ -z "${1:-}" ]]; then
- echo "The specified command requires additional parameters. See help:" >&2
- echo >&2
- command_help >&2
- exit 1
- elif [[ "${1:0:1}" = "-" ]]; then
- _exiterr "Invalid argument: ${1}"
- fi
- }
-
- [[ -z "${@}" ]] && eval set -- "--help"
-
- while (( ${#} )); do
- case "${1}" in
- --help|-h)
- command_help
- exit 0
- ;;
-
- --env|-e)
- set_command env
- ;;
-
- --cron|-c)
- set_command sign_domains
- ;;
-
- --register)
- set_command register
- ;;
-
- # PARAM_Usage: --accept-terms
- # PARAM_Description: Accept CAs terms of service
- --accept-terms)
- PARAM_ACCEPT_TERMS="yes"
- ;;
-
- --signcsr|-s)
- shift 1
- set_command sign_csr
- check_parameters "${1:-}"
- PARAM_CSR="${1}"
- ;;
-
- --revoke|-r)
- shift 1
- set_command revoke
- check_parameters "${1:-}"
- PARAM_REVOKECERT="${1}"
- ;;
-
- --cleanup|-gc)
- set_command cleanup
- ;;
-
- # PARAM_Usage: --full-chain (-fc)
- # PARAM_Description: Print full chain when using --signcsr
- --full-chain|-fc)
- PARAM_FULL_CHAIN="1"
- ;;
-
- # PARAM_Usage: --ipv4 (-4)
- # PARAM_Description: Resolve names to IPv4 addresses only
- --ipv4|-4)
- PARAM_IP_VERSION="4"
- ;;
-
- # PARAM_Usage: --ipv6 (-6)
- # PARAM_Description: Resolve names to IPv6 addresses only
- --ipv6|-6)
- PARAM_IP_VERSION="6"
- ;;
-
- # PARAM_Usage: --domain (-d) domain.tld
- # PARAM_Description: Use specified domain name(s) instead of domains.txt entry (one certificate!)
- --domain|-d)
- shift 1
- check_parameters "${1:-}"
- if [[ -z "${PARAM_DOMAIN:-}" ]]; then
- PARAM_DOMAIN="${1}"
- else
- PARAM_DOMAIN="${PARAM_DOMAIN} ${1}"
- fi
- ;;
-
- # PARAM_Usage: --keep-going (-g)
- # PARAM_Description: Keep going after encountering an error while creating/renewing multiple certificates in cron mode
- --keep-going|-g)
- PARAM_KEEP_GOING="yes"
- ;;
-
- # PARAM_Usage: --force (-x)
- # PARAM_Description: Force renew of certificate even if it is longer valid than value in RENEW_DAYS
- --force|-x)
- PARAM_FORCE="yes"
- ;;
-
- # PARAM_Usage: --no-lock (-n)
- # PARAM_Description: Don't use lockfile (potentially dangerous!)
- --no-lock|-n)
- PARAM_NO_LOCK="yes"
- ;;
-
- # PARAM_Usage: --lock-suffix example.com
- # PARAM_Description: Suffix lockfile name with a string (useful for with -d)
- --lock-suffix)
- shift 1
- check_parameters "${1:-}"
- PARAM_LOCKFILE_SUFFIX="${1}"
- ;;
-
- # PARAM_Usage: --ocsp
- # PARAM_Description: Sets option in CSR indicating OCSP stapling to be mandatory
- --ocsp)
- PARAM_OCSP_MUST_STAPLE="yes"
- ;;
-
- # PARAM_Usage: --privkey (-p) path/to/key.pem
- # PARAM_Description: Use specified private key instead of account key (useful for revocation)
- --privkey|-p)
- shift 1
- check_parameters "${1:-}"
- PARAM_ACCOUNT_KEY="${1}"
- ;;
-
- # PARAM_Usage: --config (-f) path/to/config
- # PARAM_Description: Use specified config file
- --config|-f)
- shift 1
- check_parameters "${1:-}"
- CONFIG="${1}"
- ;;
-
- # PARAM_Usage: --hook (-k) path/to/hook.sh
- # PARAM_Description: Use specified script for hooks
- --hook|-k)
- shift 1
- check_parameters "${1:-}"
- PARAM_HOOK="${1}"
- ;;
-
- # PARAM_Usage: --out (-o) certs/directory
- # PARAM_Description: Output certificates into the specified directory
- --out|-o)
- shift 1
- check_parameters "${1:-}"
- PARAM_CERTDIR="${1}"
- ;;
-
- # PARAM_Usage: --challenge (-t) http-01|dns-01
- # PARAM_Description: Which challenge should be used? Currently http-01 and dns-01 are supported
- --challenge|-t)
- shift 1
- check_parameters "${1:-}"
- PARAM_CHALLENGETYPE="${1}"
- ;;
-
- # PARAM_Usage: --algo (-a) rsa|prime256v1|secp384r1
- # PARAM_Description: Which public key algorithm should be used? Supported: rsa, prime256v1 and secp384r1
- --algo|-a)
- shift 1
- check_parameters "${1:-}"
- PARAM_KEY_ALGO="${1}"
- ;;
-
- *)
- echo "Unknown parameter detected: ${1}" >&2
- echo >&2
- command_help >&2
- exit 1
- ;;
- esac
-
- shift 1
- done
-
- case "${COMMAND}" in
- env) command_env;;
- sign_domains) command_sign_domains;;
- register) command_register;;
- sign_csr) command_sign_csr "${PARAM_CSR}";;
- revoke) command_revoke "${PARAM_REVOKECERT}";;
- cleanup) command_cleanup;;
- *) command_help; exit 1;;
- esac
- }
-
- # Determine OS type
- OSTYPE="$(uname)"
-
- # Check for missing dependencies
- check_dependencies
-
- # Run script
- main "${@:-}"
|